Nie Pengju, a representative of the National People's Congress, proposed during the two sessions: "Industrial robots are the most representative products in the field of intelligent manufacturing. It is recommended to increase support for the core parts industry of industrial robots, promote the development of the industry in the direction of mid-to-high-end, and improve the research and development and manufacturing of domestic robots. level."
The reason why such a proposal was put forward at the two sessions is based on the following facts: my country has become the world's largest consumer market for industrial robots for six consecutive years (currently accounting for about one-third of the global market), and is growing rapidly at a rate of more than 20%. However, even with such great vitality, compared with foreign countries, my country's industrial robot industry has bottlenecks such as weak independent innovation capabilities, lack of core talents and core technologies, and severe constraints on mid- and high-end core components.
In the past two years, my country's technological development and the popularity of intelligent products have greatly improved, and the robot market has ushered in a small peak. Although affected by the epidemic in early 2020 and the overall market economy fluctuated, robots performed outstandingly in this "war epidemic", especially service robots.
my country's robot market size from 2016 to 2020
With the in-depth study and improvement of quality technology, some domestic robots have also begun to go abroad and enter the international market. Compared with imported brands, low-priced domestic industrial robots can serve foreign and domestic manufacturing companies with better technology and reliability, which means they have a higher cost-effective advantage. Therefore, the opportunities and space for domestic robots are still huge.
At present, industrial robots are mainly used to replace simple repetitive labor. Robots that are too expensive will lose their significance. Low-cost industrial robots are more conducive to promoting the implementation of Industry 4.0 and intelligent manufacturing solutions. However, the development of intelligent manufacturing requires industrial robots to have good quality and advanced functions, so the investment cost will not be very low.
In order to seize market share, some AGV companies have begun to engage in price wars. In 2014, an ordinary AGC product could sell for about 160,000. However, today with serious inflation, some companies only sell less than 40,000. Domestic AGV prices are affected by walking mode, charging method, load, navigation method, etc., and the price ranges from hundreds of thousands to more than one million. But now some companies have called for reducing the price of AGV to less than 30,000, which makes it difficult for some smaller manufacturers to gain a foothold in the market.
However, many buyers are limited by cost or do not know enough about AGVs. They may choose the low-priced one due to cost. This cycle is like this. Bad money drives out good money. Slowly, good things start to reduce their prices in order to survive!
Robot density refers to the number of robots per 10,000 workers in an industry. This indicator is an important parameter reflecting the level of a country's manufacturing industry.
Although China's robot market is vast, in the context of a larger processing and manufacturing industry, there is actually still a lot of room for improvement in my country's automation level. In 2017, China's industrial robot density was 97 units per 10,000 people, exceeding the global average for the first time. In 2019, the China Electronics Society released the "China Robot Industry Development Report (2019)". The "Report" shows that according to the International Federation of Robotics (IFR), China's robot density will exceed 130 units per 10,000 people in 2021, reaching the average level of developed countries.
Midea Group has begun to make efforts to increase the density of robots. In the past five years, it has invested more than 30 billion yuan in scientific research and established 28 R&D centers in 11 countries, including China. The total number of R&D personnel worldwide exceeds 10,000. The purpose is Increase the density of robot usage to the level of developed countries with 625 units per 10,000 people.
At present, more than 80% of domestic robot companies are robot system integration companies, not robot ontology companies.
When domestic industrial robots first started, a few companies selling robots were profitable. However, due to frequent stability problems, after-sales maintenance costs were very high, and integrators emerged as the times require. Many people say that it is very profitable to do well in robot integration applications, but this seems to be a bit of a generalization.
On the one hand, system integration projects are almost all non-standardized. Each project is different and difficult to scale. The annual output value of most manufacturers is not high, and "large enterprises" with revenue exceeding 300 million yuan are mainly concentrated. In the four major automotive process fields. In other words, only these leading integrator companies in the entire industry can really make money.
However, the current industrial robot industry itself is an industry integrating system integration, advanced manufacturing and precision supporting, so system integration will also be a necessary condition for the development of the entire industry. Comparatively speaking, it is a long-term and arduous task to break away from the limitations of core technologies and change the limitations of market scale. Therefore, the most promising breakthrough in the industrial robot industry is still in the field of system integration.
Industrial robot system integrators and ontology manufacturing complement each other and are the basis for industrial robot automation applications. The development of robot ontology requires the promotion of system integrators, and system integrators also need the support of ontology manufacturers. my country's integrator companies should seize the opportunity to subdivide the industry, gradually modularize and functionalize it, master core processes, and complete professional technology accumulation. In addition, system integrators can also develop smart factories or digital factories, not only doing hardware integration, but also top-level architecture design and software integration.
To do a good job in quality management, it starts from the selection of core components and raw materials, that is, entering into a strict testing process, and there must also be detailed management rules in the assembly process. From a macro perspective, although domestic industrial robots are still far behind developed countries, the gap is gradually narrowing. With the improvement of quality and technology, some domestic robots can go abroad and enter the international market, which is how we are recognized. Compared with imported brands, low-priced domestic industrial robots can serve manufacturing companies with better technology and greater reliability, occupying a higher cost-effective advantage. Therefore, the opportunities and space for domestic robots are still great, let us wait and see. .
